Flag
  • Sign In
  • 0 items
  • Search
Welcome Guest! Please login to enable all features.

Notification

Icon
Error

Lobelia Offline
#1 Posted : Saturday, March 16, 2013 3:10:06 AM(UTC)
Lobelia

Rank: Member

Groups: Registered
Joined: 2/4/2008(UTC)
Posts: 15
Location: Washington

Thanks: 10 times
I am totally frustrated with my Cricut. Over the last few days, it's not cutting through the cardstock or good quality scrapbook paper. The small areas are being torn. I have my pressure at the max setting and my blade at 6, I've slowed the speed for the more delicate images. I changed the blade too. I need this machine to work, as I'm preparing a project for a class I will teach. My machine has all the updates it needs. I sure hope someone can suggest something else.Mad
Narelle Offline
#2 Posted : Saturday, March 16, 2013 4:08:51 AM(UTC)
Narelle

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Circle Member, Registered
Joined: 9/26/2006(UTC)
Posts: 10,874
Australia
Location: Brisbane, Australia

Thanks: 2027 times
Was thanked: 7801 time(s) in 3638 post(s)
Have you tried a stickier mat?

If it's the regular Expression you're using you could try a reset.

If that doesn't help, it could be the blade housing itself.

You might need to call PC customer service. They were trialling Saturday morning hours a few months ago but I'm not sure if they still are. It's worth a try though.

Here's the reset instructions:

1-Turn on your machine with no cartridge loaded.
2-Rolls all the grey dials down to lowest setting.
3-Open up the front where the blade housing sits, use the black arms, with the
screw to pull that entire unit along its track over to the other side
Of the machine.
4-Over where that unit usually sits, if you reach back there with your fingers, you’ll
feel a red button sticking out.
Push and hold down that button for 5 seconds, counting to 5 slowly. Then let go.
5-Use the black arms to move that unit back into its place where it usually sits.
6-Next you are going to roll all the grey dials all the way up and all the way down 3 times,
so three times total for EACH dial-doing 3 cycles of each up & down (may do 1 at a time)
7-Now press the CUT button
8-Turn the machine off
9-Let your machine sit for a FULL 45 min to an hour
10-After that full time passes, load a cartridge on, turn on your machine and try a
practice cut of something simple.
 2 users thanked Narelle for this useful post.
fariering719f9c08 on 4/4/2013(UTC), ottergirl on 4/12/2013(UTC)
BeckyLarson1 Offline
#3 Posted : Monday, April 01, 2013 3:34:08 AM(UTC)
BeckyLarson1

Rank: Advanced Member

Groups: Registered
Joined: 12/5/2008(UTC)
Posts: 901

Thanks: 55 times
Was thanked: 257 time(s) in 244 post(s)
This has happened to me also. I had little bits of paper in the blade housing. When you take it out and push down on the button as if you were going to replace the blade look and see if there is any bits of paper in there. This happens to me when I am using thicker paper.
Good luck I hope you get it fixed.
fariering719f9c08 Offline
#4 Posted : Thursday, April 04, 2013 9:38:30 AM(UTC)
fariering719f9c08

Rank: Newbie

Groups: Registered
Joined: 1/2/2013(UTC)
Posts: 5

Thanks: 2 times
Was thanked: 1 time(s) in 1 post(s)
The same thing is happening to me. I called the support & they told me my blade housing was bad, so I ordered another one. At $30.00. Got it put it in & still doing the same thing.
Did the restart that was suggested here & my cricut is working wonderfully! <3
Thank you so much!

Edited by user Thursday, April 04, 2013 6:48:32 PM(UTC)  | Reason: Not specified

fariering719f9c08 Offline
#5 Posted : Thursday, April 11, 2013 8:10:12 AM(UTC)
fariering719f9c08

Rank: Newbie

Groups: Registered
Joined: 1/2/2013(UTC)
Posts: 5

Thanks: 2 times
Was thanked: 1 time(s) in 1 post(s)
Had the cricut working after the restart, then tried to use craft room. Had to update my machine & now it wont work again. Grrrrr....
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 0.582 seconds.
nebo-cricut-04