Flag
  • Sign In
  • 0 items
  • Search
Welcome Guest! Please login to enable all features.

Notification

Icon
Error

KendriaRobinson Offline
#1 Posted : Sunday, September 15, 2013 6:21:24 PM(UTC)
KendriaRobinson

Rank: Newbie

Groups: Registered
Joined: 1/20/2011(UTC)
Posts: 9

When I tried to turn on my Cricut today, it wouldn't come all the way on. The lights were flickering on and off and it acted like it was going to start, but never came all the way on. Anyone else ever had this problem? I heard somewhere that you can reset the Cricut, but I'm not sure where I can find these instructions. Crying
Leanner Offline
#2 Posted : Sunday, September 15, 2013 6:38:52 PM(UTC)
Leanner

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Circle Member, Registered
Joined: 1/5/2009(UTC)
Posts: 3,507

Thanks: 1053 times
Was thanked: 1557 time(s) in 1145 post(s)
Hmm it would possibly be your power cord?
KendriaRobinson Offline
#3 Posted : Sunday, September 15, 2013 6:43:08 PM(UTC)
KendriaRobinson

Rank: Newbie

Groups: Registered
Joined: 1/20/2011(UTC)
Posts: 9

I thought so too so I replaced the power cord. Still having the same problem.
AuntieKLE Offline
#4 Posted : Sunday, September 15, 2013 6:54:29 PM(UTC)
AuntieKLE

Rank: Advanced Member

Groups: Registered
Joined: 5/30/2008(UTC)
Posts: 509

Thanks: 6 times
Was thanked: 148 time(s) in 113 post(s)
Here are the reset instructions.

HTH

TECH SUPPORT NOOK - Reset Process
If your machine freezes, experiences power problems, cutting issues, or anything out of the realm of normal Cricut behavior, this reset procedure is a good place to start the troubleshooting process. Nine times out of ten, this will resolve the issue:

- First, turn your machine on with no cartridge loaded. Then you are going to roll all your gray dials (the two on the left and the one on the right) down to their lowest setting.

- Then you will want to grasp the green/gold cylinder blade ****embly and use it to pull the entire gray carriage car unit (the one with the Cricut bug on it) along its track to the other side of the machine. Back in the cave where the gray carriage car usually sits there is a red button. Press that button and hold it down for about three seconds. Let go and then move the gray carriage car back into place.

- This next step will sound a bit odd, but many times it can fix your little "bug". You're going to roll all your dials all the way up and all the way down three times--three times for each dial.

- Then you are going to hit the "Cut" button and turn the machine off. Let the machine sit for a few minutes (15-20), load a cartridge, turn it on, and try a practice cut.

If this does not solve your problem, give us a call toll free at 1-877-727-4288 7am to 6pm MST Mon-Fri (make sure you are by your machine) and someone here will walk you through some troubleshooting tips and determine if a replacement machine is needed.
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 0.308 seconds.
nebo-cricut-01