Flag
  • Sign In
  • 0 items
  • Search
Welcome Guest! Please login to enable all features.

Notification

Icon
Error

3 Pages123>
14cross Offline
#1 Posted : Tuesday, February 08, 2011 3:04:29 PM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Attached is a new version of the Advanced Calibration procedure. There were some questions about how Scale adjustments work so I tried to reword things to make it more clear. I also added a section on changing both the Scale and Offset in the same image.

Hopefully these instructions will be clearer.

Chris
Provo Craft

Edited by user Thursday, February 10, 2011 8:33:09 AM(UTC)  | Reason: Not specified

File Attachment(s):
Imagine Advanced Calibration Steps.doc (1,683kb) downloaded 2,186 time(s).
Imagine Advance Calibration.zip (994kb) downloaded 708 time(s).
 32 users thanked 14cross for this useful post.
♥ ~ Adele ~ ♥ on 2/8/2011(UTC), Kaybug on 2/8/2011(UTC), 4i's on 2/8/2011(UTC), *Tom* on 2/8/2011(UTC), flyoes on 2/8/2011(UTC), sandpratt on 2/8/2011(UTC), *Karel* on 2/9/2011(UTC), *Heather* on 2/9/2011(UTC), Ann on 2/9/2011(UTC), cricutkris on 2/9/2011(UTC), Ang on 2/9/2011(UTC), StephanieHopper1 on 2/9/2011(UTC), SheilaCourts on 2/9/2011(UTC), Khrista on 2/9/2011(UTC), Michele4 on 2/9/2011(UTC), ScrappinFiggy on 2/9/2011(UTC), O2BMe on 2/10/2011(UTC), ChunkyMonkey on 2/10/2011(UTC), normafricker2 on 2/10/2011(UTC), MaryLouOZ on 2/14/2011(UTC), JoyceDunlap on 2/15/2011(UTC), Chanda on 2/21/2011(UTC), Lamminator on 2/28/2011(UTC), Kimber Renee on 3/23/2011(UTC), ShawnfromMN on 3/28/2011(UTC), AgnesThomson on 4/2/2011(UTC), Makeupgirl217 on 4/24/2011(UTC), Trinity on 8/11/2011(UTC), scrappin-nanapuddin on 3/1/2012(UTC), JenniferStutzman on 4/12/2012(UTC), krafty kate on 6/24/2013(UTC), Llamagrl on 10/5/2013(UTC)
Khrista Offline
#2 Posted : Wednesday, February 09, 2011 6:58:59 PM(UTC)
Khrista

Rank: Advanced Member

Medals: Cricut Circle Member: Member of the Cricut Circle

Groups: Registered, Circle Member
Joined: 5/12/2010(UTC)
Posts: 5,360
United States
Location: Southwest Washington State

Thanks: 1444 times
Was thanked: 2510 time(s) in 1398 post(s)
14cross wrote:
Attached is a new version of the Advanced Calibration procedure. There were some questions about how Scale adjustments work so I tried to reword things to make it more clear. I also added a section on changing both the Scale and Offset in the same image.

Hopefully these instructions will be clearer.

Chris
Provo Craft



This is REALLY helpful Chris. Thank you. BigGrin It's all clicking for me now much better.
 1 user thanked Khrista for this useful post.
denubug on 8/8/2014(UTC)
MissScrapAlot Offline
#3 Posted : Wednesday, February 09, 2011 9:59:05 PM(UTC)
MissScrapAlot

Rank: Advanced Member

Groups: Registered
Joined: 11/30/2006(UTC)
Posts: 531
Location: Longview Washington

Thanks: 206 times
Was thanked: 67 time(s) in 52 post(s)
Sorry to bother you Chris as you are uber busy, but can you make this file easliy opened another way? I do not have Word at the moment :(....

Thanks in advance :))))))

Anne
14cross Offline
#4 Posted : Thursday, February 10, 2011 8:41:01 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
MissScrapAlot wrote:
Sorry to bother you Chris as you are uber busy, but can you make this file easliy opened another way? I do not have Word at the moment :(....

Thanks in advance :))))))

Anne


I saved each page as a jpg and zipped all the pages into one file. It is now attached to the original post above. Hopefully that will help.

Chris
Provo Craft
TheBugBytes Offline
#5 Posted : Monday, February 14, 2011 8:56:09 AM(UTC)
TheBugBytes

Rank: Advanced Member

Groups: Registered
Joined: 3/18/2009(UTC)
Posts: 4,242
Location: Katy, Texas

Thanks: 182 times
Was thanked: 1539 time(s) in 876 post(s)
14cross wrote:
I saved each page as a jpg and zipped all the pages into one file. It is now attached to the original post above. Hopefully that will help.

Chris
Provo Craft


Thank you Chris.
You are awesome!!
luvs2bug Offline
#6 Posted : Thursday, February 24, 2011 10:43:00 AM(UTC)
luvs2bug

Rank: Advanced Member

Groups: Registered
Joined: 11/28/2008(UTC)
Posts: 412

Thanks: 3 times
Was thanked: 36 time(s) in 24 post(s)
hi i dont have word doc tried to unzip the other file wouldnt work
Missy
14cross Offline
#7 Posted : Thursday, February 24, 2011 11:14:44 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: luvs2bug Go to Quoted Post
hi i dont have word doc tried to unzip the other file wouldnt work
Missy


Do you have a word processing program that can convert .doc files? I tried to do it as a pdf but our boards don't allow the pdf format.

Chris
Provo Craft
luvs2bug Offline
#8 Posted : Thursday, February 24, 2011 2:37:30 PM(UTC)
luvs2bug

Rank: Advanced Member

Groups: Registered
Joined: 11/28/2008(UTC)
Posts: 412

Thanks: 3 times
Was thanked: 36 time(s) in 24 post(s)
nope cant covert darn
14cross Offline
#9 Posted : Thursday, February 24, 2011 3:01:34 PM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: luvs2bug Go to Quoted Post
nope cant covert darn


What formats can your computer read? Maybe I can convert to one of them. The options are:

14cross Offline
#10 Posted : Thursday, February 24, 2011 3:03:25 PM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: luvs2bug Go to Quoted Post
nope cant covert darn


What formats can your computer read? Maybe I can convert to one of them. Select more than one in case one formwat won't work for this document. The remaining available formats that the boards will accept are:

*.avi, *.bmp, *.gif, *.mov, *.mp3, *.mpg, *.png, *.rar, *.rm, *.tif, *.txt, *.wav, *.wma, *.wmv, *.wpd, *.xls

Chris
Provo Craft
14cross Offline
#11 Posted : Thursday, February 24, 2011 3:03:41 PM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: luvs2bug Go to Quoted Post
nope cant covert darn


What formats can your computer read? Maybe I can convert to one of them. Select more than one in case one formwat won't work for this document. The remaining available formats that the boards will accept are:

*.avi, *.bmp, *.gif, *.mov, *.mp3, *.mpg, *.png, *.rar, *.rm, *.tif, *.txt, *.wav, *.wma, *.wmv, *.wpd, *.xls

Chris
Provo Craft
JackieKelley Offline
#12 Posted : Sunday, March 06, 2011 3:57:05 PM(UTC)
JackieKelley

Rank: Member

Groups: Registered
Joined: 5/28/2008(UTC)
Posts: 10

Was thanked: 9 time(s) in 2 post(s)
Chris,
I've had an issue with the images on the bottom half of my mat not cutting correctly, and I've seen were others have had this issue. I've done the advanced calibration in spots all over the mat (using load last) and it lines up perfeclty, but when I do a full sheet of images (random or the same image) the bottom half of the sheet don't line up right.

check out a few photos of the issue I'm having. you can clearly see that the images on the top of the page line up perfectly, but the images toward (or at the bottom) don't line up as well.
I hope these photos help . . .

thanks for all your help!
Jackie Kelley

Edited by user Sunday, March 06, 2011 4:05:54 PM(UTC)  | Reason: Not specified

File Attachment(s):
random cuts.JPG (2,247kb) downloaded 142 time(s).
full sheet.JPG (2,203kb) downloaded 122 time(s).
full sheet top.JPG (2,308kb) downloaded 69 time(s).
full sheet bottom.JPG (2,281kb) downloaded 99 time(s).
14cross Offline
#13 Posted : Tuesday, March 08, 2011 8:29:06 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: JackieKelley Go to Quoted Post
Chris,
I've had an issue with the images on the bottom half of my mat not cutting correctly, and I've seen were others have had this issue. I've done the advanced calibration in spots all over the mat (using load last) and it lines up perfeclty, but when I do a full sheet of images (random or the same image) the bottom half of the sheet don't line up right.

check out a few photos of the issue I'm having. you can clearly see that the images on the top of the page line up perfectly, but the images toward (or at the bottom) don't line up as well.
I hope these photos help . . .

thanks for all your help!
Jackie Kelley


Sorry I didn't get with you yesterday. With the release of the big update I was busy the whole day. I looked at your pictures and would recommend that you go into advanced calibration and decrease your Right - Left offset by about 5 and decrease your Top - Bottom Scale by 0.02. See if that works for you. Also make sure you are feeding the mat in as straight as possible. I always push the "Insert Mat Here" plastic mat guide all the way to the left and then, when I insert the mat, I always press the mat against the left side of the "Insert Mat Here" mat guide and insert the mat as far as it will go into the Imagine. That way skew is minimized.

Let me know if that helps.

Chris
Provo Craft
 1 user thanked 14cross for this useful post.
Makeupgirl217 on 3/8/2011(UTC)
Debra Offline
#14 Posted : Thursday, March 17, 2011 5:23:25 PM(UTC)
Debra

Rank: Member

Groups: Registered
Joined: 6/22/2009(UTC)
Posts: 16

Thanks: 17 times
Was thanked: 4 time(s) in 4 post(s)
Thanks Chris it worked perfectly !!!
scrappintwin Offline
#15 Posted : Sunday, April 10, 2011 5:06:43 PM(UTC)
scrappintwin

Rank: Newbie

Groups: Registered
Joined: 3/26/2011(UTC)
Posts: 4

Hi Chris,

I'm hoping you can help!

Since I got my machine I've re-calibrated between each sheets and have separated projects so I get fresh cuts off each calibration. I've re-calibrated my machine more often then I've used it in projects. I have to admit I've often given up on any projects out of frustration. I've wasted so much paper. I haven't done the advance calibration yet because I'm not sure which setting to change and if that would change the top part of the page (which is cutting fine). I'm running out of white paper! The beginning of the sheet starts out with great cuts but by the time it gets to the bottom the entire cut is off.

I've been going through the posts and saw that the problem rectify for some people after they updated the machine so I did that hoping that my problem would be resolved but unfortunately, I'm not sure what to do next.

I took a few pictures to show you; however, this is my first post and I don't know how to attach anything.

Sincerely



scrappintwin attached the following image(s):
IMG_0237.jpg
IMG_0236.JPG
14cross Offline
#16 Posted : Monday, April 11, 2011 7:47:26 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: scrappintwin Go to Quoted Post
Hi Chris,

I'm hoping you can help!

Since I got my machine I've re-calibrated between each sheets and have separated projects so I get fresh cuts off each calibration. I've re-calibrated my machine more often then I've used it in projects. I have to admit I've often given up on any projects out of frustration. I've wasted so much paper. I haven't done the advance calibration yet because I'm not sure which setting to change and if that would change the top part of the page (which is cutting fine). I'm running out of white paper! The beginning of the sheet starts out with great cuts but by the time it gets to the bottom the entire cut is off.

I've been going through the posts and saw that the problem rectify for some people after they updated the machine so I did that hoping that my problem would be resolved but unfortunately, I'm not sure what to do next.

I took a few pictures to show you; however, this is my first post and I don't know how to attach anything.

Sincerely




Stary by going into Advanced Calibration and decreasing your Top-Bottom SCALE by 0.3. Let me know if that fixes the images on the bottom of the mat. If it doesn't then take pictures of images on the top of the mat and the bottom of the mat and I will make more suggestions.

Chris
Provo Craft
HiGhLaNdEyEs Offline
#17 Posted : Thursday, April 28, 2011 7:16:54 PM(UTC)
HiGhLaNdEyEs

Rank: Advanced Member

Groups: Registered
Joined: 12/26/2006(UTC)
Posts: 445
Location: Crossville, TN

Thanks: 147 times
Was thanked: 86 time(s) in 72 post(s)
How long are we suppose to hold down the top left button and the start calibration button...cause I've tried it like 5 times and it keeps wanting to load mat....so not liking this already...help;0)

}}}HUGS{{{,
Sheri G
HiGhLaNdEyEs Offline
#18 Posted : Thursday, April 28, 2011 7:35:20 PM(UTC)
HiGhLaNdEyEs

Rank: Advanced Member

Groups: Registered
Joined: 12/26/2006(UTC)
Posts: 445
Location: Crossville, TN

Thanks: 147 times
Was thanked: 86 time(s) in 72 post(s)
Finally got it to work....not sure how, but now going through the direction, wish me luck;0)

}}}HUGS{{{,
Sheri G
14cross Offline
#19 Posted : Friday, April 29, 2011 10:16:13 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: HiGhLaNdEyEs Go to Quoted Post
Finally got it to work....not sure how, but now going through the direction, wish me luck;0)

}}}HUGS{{{,
Sheri G


How'd it go?

Chris
Provo Craft
SarahJACKSON1 Offline
#20 Posted : Sunday, May 01, 2011 6:52:30 PM(UTC)
SarahJACKSON1

Rank: Newbie

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 4

Thanks: 1 times
I followed the pdf report, then tried all the suggestions and still cannot get the Imagine to cut my images correctly. I have wasted over a dozen sheets today. (cried, then ate a bowl of ice cream). I am still very new to crafting, but very fustrated with the Imagine! It amazingly cuts the square that is pre-loaded, but nothing on the cartridges! PLEASE help and send suggestions! Much appreciated!
SarahCrying
14cross Offline
#21 Posted : Monday, May 02, 2011 9:04:25 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: SarahJACKSON1 Go to Quoted Post
I followed the pdf report, then tried all the suggestions and still cannot get the Imagine to cut my images correctly. I have wasted over a dozen sheets today. (cried, then ate a bowl of ice cream). I am still very new to crafting, but very fustrated with the Imagine! It amazingly cuts the square that is pre-loaded, but nothing on the cartridges! PLEASE help and send suggestions! Much appreciated!
SarahCrying


I need more information.

1. Can you tell me the update numbers for your Imagine? You can find them in the About screen, which is accessed from the main menu. I need all numbers in parenthesis.
2. What flavor of ice cream did you eat?
3. Is there any left?

Chris
Provo Craft
 1 user thanked 14cross for this useful post.
SarahJACKSON1 on 5/4/2011(UTC)
Makeupgirl217 Offline
#22 Posted : Monday, May 02, 2011 11:17:18 AM(UTC)
Makeupgirl217

Rank: Advanced Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 2,741
Location: Kansas

Thanks: 2019 times
Was thanked: 1582 time(s) in 813 post(s)
Hi Chris!
I wanted to let you know how much I appreciate your direction in this thread. They are very clear and concise. My trouble with calibration does not seem to be able to be fixed using these directions. I have attached pics for you to see. I have had this machine for 1.5 months and had no issues until I updated 10 days ago.
I am on Cricut Sync 2.0.5.3
I Firmware 0111
I Content Version 0024
I Seriel # 423552
File Attachment(s):
Full Page.JPG (2,808kb) downloaded 75 time(s).
LOWER LEFT.JPG (2,855kb) downloaded 30 time(s).
LOWER RIGHT.JPG (2,793kb) downloaded 20 time(s).
UPPER LEFT.JPG (2,745kb) downloaded 14 time(s).
UPPER RIGHT.JPG (2,837kb) downloaded 21 time(s).
14cross Offline
#23 Posted : Monday, May 02, 2011 11:19:32 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: Makeupgirl217 Go to Quoted Post
Hi Chris!
I wanted to let you know how much I appreciate your direction in this thread. They are very clear and concise. My trouble with calibration does not seem to be able to be fixed using these directions. I have attached pics for you to see. I have had this machine for 1.5 months and had no issues until I updated 10 days ago.
I am on Cricut Sync 2.0.5.3
I Firmware 0111
I Content Version 0024
I Seriel # 423552


Could you pull the squares off of each corner and repost the picture? It is a little hard to see when using black as the color. Thanks!
Chris
Provo Craft

Edited by user Monday, May 02, 2011 11:22:11 AM(UTC)  | Reason: Not specified

 1 user thanked 14cross for this useful post.
Makeupgirl217 on 5/2/2011(UTC)
Makeupgirl217 Offline
#24 Posted : Monday, May 02, 2011 11:34:25 AM(UTC)
Makeupgirl217

Rank: Advanced Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 2,741
Location: Kansas

Thanks: 2019 times
Was thanked: 1582 time(s) in 813 post(s)
Here are pics of each corner with squares removed (looking at the negative).
File Attachment(s):
Lower Left.JPG (2,530kb) downloaded 73 time(s).
Lower Right.JPG (2,405kb) downloaded 33 time(s).
Upper Left.JPG (2,231kb) downloaded 25 time(s).
Upper Right.JPG (2,325kb) downloaded 28 time(s).
14cross Offline
#25 Posted : Monday, May 02, 2011 12:02:19 PM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: Makeupgirl217 Go to Quoted Post
Here are pics of each corner with squares removed (looking at the negative).


Decrease the Top-Bottom SCALE by 0.2.
Increase your Right-Left OFFSET by 7.
Increase your Right Left SCALE 0.2.

Let me know how that works.

Chris
Provo Craft
 1 user thanked 14cross for this useful post.
Makeupgirl217 on 5/2/2011(UTC)
Makeupgirl217 Offline
#26 Posted : Monday, May 02, 2011 12:36:51 PM(UTC)
Makeupgirl217

Rank: Advanced Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 2,741
Location: Kansas

Thanks: 2019 times
Was thanked: 1582 time(s) in 813 post(s)
Originally Posted by: 14cross Go to Quoted Post
Decrease the Top-Bottom SCALE by 0.2.
Increase your Right-Left OFFSET by 7.
Increase your Right Left SCALE 0.2.

Let me know how that works.

Chris
Provo Craft

Ok I followed your settings and here are my results. A bit of improvement but not by much. I have done this so many times, I am running out of ink.

Edited by user Monday, May 02, 2011 12:39:28 PM(UTC)  | Reason: Not specified

Makeupgirl217 attached the following image(s):
Full Page.JPG
Lower Left.JPG
Lower Right.JPG
Upper Left.JPG
Upper Right.JPG
Makeupgirl217 Offline
#27 Posted : Monday, May 02, 2011 11:39:46 PM(UTC)
Makeupgirl217

Rank: Advanced Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 2,741
Location: Kansas

Thanks: 2019 times
Was thanked: 1582 time(s) in 813 post(s)
Ok So I played some more tonight with offset. This is where I am now. I have what I think looks like a perfect 2 inch square with good scale and offset.
BUT
When I go to cut these images from Enjoy the Seasons, They are all off.
Makeupgirl217 attached the following image(s):
Good Sqaure.JPG
DSC_5179.JPG
DSC_5178.JPG
DSC_5176.JPG
DSC_5175.JPG
14cross Offline
#28 Posted : Tuesday, May 03, 2011 7:52:40 AM(UTC)
14cross

Rank: Advanced Member

Groups: Cricut Community Moderator, Registered
Joined: 10/28/2009(UTC)
Posts: 1,048

Thanks: 22 times
Was thanked: 798 time(s) in 205 post(s)
Originally Posted by: Makeupgirl217 Go to Quoted Post
Ok So I played some more tonight with offset. This is where I am now. I have what I think looks like a perfect 2 inch square with good scale and offset.
BUT
When I go to cut these images from Enjoy the Seasons, They are all off.


I can't see the whole mat and don't know where on the mat those images were placed but it looks to me like you need to decrease the Top-Bottom SCALE by 0.2 or 0.3.

Chris
Provo Craft
 1 user thanked 14cross for this useful post.
Makeupgirl217 on 5/3/2011(UTC)
Makeupgirl217 Offline
#29 Posted : Tuesday, May 03, 2011 10:41:38 PM(UTC)
Makeupgirl217

Rank: Advanced Member

Groups: Registered
Joined: 9/30/2009(UTC)
Posts: 2,741
Location: Kansas

Thanks: 2019 times
Was thanked: 1582 time(s) in 813 post(s)
Chris-

I did as you said and these were my test cuts with the same images from Enjoy the Seasons. As you can see in the first pic, the calibration adjustment of .2 or.3 is negligible. I chose the .3
I really liked how even the image looked. SUPER EXCITED! Woot
BUT . . . . (insert ominous tones)Scared
I tried to cut the layers of images I wanted for my project. All my cuts are off again!Cursing I changed nothing. In fact the .3 cut from my test cut of banners is in the same relative spot as my layers cuts. The calibration did not change at all between the two cuts. My machine will not hold a calibration! I am so upset. I can live with horrible cutting on the bottom of the mat but not on the top. If you can't give me any more suggestions, I guess I will have to call CS for replacement number 3.Crying

Edited by user Tuesday, May 03, 2011 10:44:29 PM(UTC)  | Reason: Not specified

Makeupgirl217 attached the following image(s):
Full page banner test cuts.JPG
.3 even test cut.JPG
Full page layered cuts.JPG
Banner layered cut off.JPG
Comparitive cuts side by side.JPG
SarahJACKSON1 Offline
#30 Posted : Wednesday, May 04, 2011 4:17:38 PM(UTC)
SarahJACKSON1

Rank: Newbie

Groups: Registered
Joined: 4/26/2008(UTC)
Posts: 4

Thanks: 1 times
Originally Posted by: 14cross Go to Quoted Post
I need more information.

1. Can you tell me the update numbers for your Imagine? You can find them in the About screen, which is accessed from the main menu. I need all numbers in parenthesis.
2. What flavor of ice cream did you eat?
3. Is there any left?

Chris
Provo Craft


Thanks for the help. Sorry, I was not able to log on the last 2 days.
1. Version 1.01 and (0079:0009:0240:201G)
2. The new Ben & Jerry's Red Velvet Cake! YUMMY!
3. Unfortunatley NO!

This is my second machine as the first one, (used only twice) a roller fell out??? This one came with a paper stating that it was updated by quality control. I was able to cut one sheet (7 images) and worked GREAT, the next dozen, not so great!

Sarah
Users browsing this topic
Guest
3 Pages123>
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

Powered by YAF | YAF © 2003-2014, Yet Another Forum.NET
This page was generated in 1.949 seconds.
nebo-cricut-03