Cricut® Project Center
Southwest Shape Album & Gift Set-Contest Entry
Dragonfly50 (4 Projects)
Project skill level: advanced
Project time: 2 hours to 3 hours
Project tags: Notebooks/Mini Albums Birthday Family Home Décor/Accents Photos/Frames/Boards Wall Décor/Wreaths/Banners Fall Summer Vacation/Travel House Warming Celebration Celebration Cards Family Layouts Outdoors Animals Outdoor/Animal Layouts Vacation/Travel Layouts Cards Outdoor Recreation Scrapbook Layouts Gifts Southwest
Save project as a favorite 10 Faves
OTHER MATERIALS NEEDED
- Recollections Night and Fall pad
- Jute or hemp
- Binder rings
- Single hole punch
- Card stock in Southwest colors
- Watercolor pad 140lb
*Place the wolf shadow cut on the mat at 5.25 in. (button 48 with shift on).
*Weld the cuts together.
^Place another rectangle on a second mat and re-size it to 5.958 x 5.25 in.
^Place the totem pole shadow cut on the mat at 5.25 in. (button 38 with shift on) Use the height box at the top to change the height to 5.25 in. (the original height will be too tall)
^Weld the cuts together.
*Place another rectangle on a third mat and re-size it to 7.222 x 5.25 in.
*Place the dream catcher shadow cut on the mat at 5.25 in. (button 18 with shift on). Use the height box at the top to change the height to 5.25 in. (the original height will be too tall)
*Weld the cuts together.
^Place another rectangle on a fourth mat and re-size it to 8.5 x 5.25 in. This will be your last page.
*Line up the album pages on the 1 in. mat lines and adjust the album pages to nest the way they look best for you.
*Cut out the album pages using chipboard. I used the 140 lb Artist's Loft watercolor pad I purchased at Michaels.
*Wolf pages- cut designs 1 & 2 at 3-1/8 x 5 in.
*Totem pole pages- cut designs 3 & 1 at 5-15/16 x 5 in.
*Dream catcher pages- cut designs 2 & 3 at 7-1/4 x 5 in.
*Back page- cut design 1 at 8-3/8 x 5 in..
*Adhere the design papers to the album pages.
*Moon- cut 2 at 3.889 in. (cream/off white card stock)
^Decoration cuts using the Southwest cartridge.
^Wolf- cut 2 at 5.25 in. (button 48)(rust card stock)
^Wolf- cut 2 at 5.25 in (dk brown card stock)
^Cut the wolf pieces apart and adhere them on the album pages with the moon.
^Lizards- cut 2 at 1.25 in. (button 11)(yellow/gold card stock)
^Totem poles- cut 2 at 5.25 in (button 38)(dk brown card stock)
^I wanted my totem poles to be colorful so I adhered assorted small card stock pieces to their backs.
^Adhere the totem poles to the album pages.
^Dream catchers- cut 4 at 5.25 in. (button 18)(chipboard)
^Cut the extra pieces away from two of them leaving only two circles.
^Wrap the circles with jute or hemp.
^Adhere real feathers to the full dream catcher cuts. I got feathers at Michaels.
^Adhere the covered circles to the full dream catcher cuts.
^Buffalo- cut 1 at 1 in. (button 32)(dk brown card stock with a turquoise zigzag)
^Roadrunner- cut 1 at 1 in. (button24)(rust card stock).
^Cactus- cut 2 at 1 in. (button 8)(yellow or gold card stock)
^Cut black shadows to back the buffalo, roadrunner and cactus. (buttons above with shift on)
^You will adhere the buffalo, roadrunner and cactus cuts after you adhere the frames on the last page.
*Totem pole pages
-outside deco- cut 2 at 4.75 in. (button 3)(yellow/gold & turquoise)
-inside deco- cut 2 at 5.25 in. (button 3 <s>)(turquoise & rust)
-frames- cut 2 at 2.75 x 2.75 in. (cream/off white & yellow/gold)
-frames- cut 2 at 2.5 x 2.5 in. (dk brown & rust)
*Dream catcher pages
-frames- cut 2 at 4.75 x 4 in. (cream/off white & turquoise)
-frames- cut 2 at 4.5 x 3.75 in. (yellow/gold & dk brown)
-frames- cut 2 at 3.25 x 3.25 in. (yellow/gold & dk brown)
-frames- cut 2 at 3 x 3 in. (rust & turquoise)
*Adhere the buffalo, roadrunner and cactus to the last page.
*Hole punch the ends of the album pages and add 1 in. binder rings to complete the album.
*Dream catcher- cut 2 at 11 in. (chipboard)
*Cut the extra pieces from one of the dream catchers leaving only the circle.
*Wrap the circle with jute or hemp.
*Adhere real feathers to the full dream catcher.
*Punch a small hole at the top of the dream catcher, string and tie jute/hemp to create a loop.
*Hang the dream catcher for all to see and enjoy.
*Card base- cut an 8.5 x 11 in. cream/off white card stock in half so it is now two 4.25 x 11 in. pieces
*Score and fold the card base at 2.75 and 5.5 in.
*Cut a turquoise card front at 4.25 x 5.5 in.
*Adhere the card front to the 2.75 x 4.25 in. section of the card base.
*Cut design paper at 4 x 5.25 in. and adhere it to the card front.
*Using Cricut Craft Room and the House Wife shadow font from the Suburbia cartridge weld then cut the sentiment words at 1 in. (black card stock)
*Using the Southwest cartridge cut the kokoplli cut at 4.5 in. (button 1)(rust cardstock)
*Adhere the kokoplli and the sentiment to the card front.
*Cut a 4.25 x 2.5 in. strip (dk brown) and a design paper strip at 4.25 x 1.5 in.
*Adhere them to the inside bottom of the card base.
*Adhere the 3 x 3 self-stick notepad over the design strips.
*When opened the notepad will hold the card open creating a card that not only sends a message but is also a useful tool.